? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron s emiconductor technical data data sheet 630, rev. c hermetic power schottky rectifier very low voltage drop description: 45 volt, 3.0 amp, power schottky rectifier in a shd - 1 /1b package. maximum ratin gs all ratings are @ t c = 25 c unless otherwise specified. rating / condition symbol max. units peak inverse voltage piv 45 volts maximum dc output current (with cathode maintained @ t c =100 o c) i o 3.0 amps maximum nonrepetitive forward surge current (t=8.3ms, sine) i fsm 55 amps maximum junction capacitance (v r =5v) c t 160 pf maximum thermal resistance (junction to mounting surface, cathode) r jc 7 .07 c/w maximum operating and storage temperature range top/tstg - 65 to + 150 c electrical characteristics characteristic maximum forward voltage drop, pulsed (i f = 3.0 amps) t j = 25 c t j = 125 c v f 0.56 0.51 volts maximum reverse current (i r @ 45v piv) t j = 25 c t j = 125 c i r 0.3 14 ma shd116012 shd116012b
? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 630, rev. c mechanical dimensions: in inches / mm shd116012 shd116012b shd - 1 shd - 1b .090 (2.29) max alumina ring moly bas e (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .225.010 (5.71.254) .150.010 (3.81.254) .375.020 (9.52.508) .225.010 (5.71.254) .015.005 (.381.127) copper anode 0.0 0.2 0.4 0.6 0.8 forward voltage drop - v f (v) 10 -2 10 -1 10 0 10 1 instantaneous forward current - i f (a) typical forward characteristics 125 c 150 c 25 c 0 10 20 30 40 50 reverse voltage - v r (v) 10 -3 10 -2 10 -1 10 0 10 1 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 0 10 20 30 40 50 reverse voltage - v r (v) 40 50 60 70 80 90 100 110 120 130 140 junction capacitance - c t (pf) typical junction capacitance .225.010 (5.71.254) .075 (1.91) max alumina ring .225.010 (5.71.254) moly lid moly base
? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 630, rev. c shd116012 shd116012b disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product c haracteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the lates t version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aero space and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall s ensitron semiconductor be liable for any damages that may result from an accident or any other cause during operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng fr om use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, i n whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applicat ion will hinder maintenance of internatio nal peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions.
|
